====== Change Log ======


===== Version 3.7.0.3 =====
  * Inventor 2022 - 2025
  * NET8 Version for Inventor 2025


(..)

===== Version 3.3.7.0 =====
  * Error: Refresh text


===== Version 3.3.6.0 =====
  * Inventor 2022
  * New calculation functions: CountDoubles, Replace
  * License settings are saved separately
  * Common settings are now saved only when settings are unlocked.

===== Version 3.3.5.0 =====
  * Error with geometric tolerances without leader line
  * Error options "Table" wrong value name

===== Version 3.3.4.0 =====
  * Error when marking coordinate dimensions

===== Version 3.3.3.0 =====
  * New property "Text"
  * Error when deleting when several documents are open
  * Setting value "Update project parameters" is now saved in the central settings

===== Version 3.3.2.0 =====
  * COM export interface to automate the export process
  * Filter for holes and threads
  * Optimization of the positioning of the stamp symbol for geometric tolerances and surface symbols
  * Error in export of general tolerances based on accuracy SUP-#289
  * Options: Update of file properties when opening the options dialog DEVOPS-#273

===== Version 3.3.1.0 =====
  * Rounding problem with minor deviations at 10th decimal place e.g. 91.499999999999
  * Updating the characteristic data when updating (& re-number) the stamps
  * Improvement when processing overwritten chamfer designations
  * Support of Inventor 2021

===== Version 3.3.0.0 =====
  * Export DFD file format
  * Calculation of general tolerances for holevalues
  * A file property can now be used to specify that numbering can no longer be changed
  * Error: If no thread data is available (e.g. for a hole) no empty row is exported anymore
  * Individual marking of dimension groups e.g. chain dimensions, coordinate dimensions
  * Exclusion/inclusion of the origin for coordinate dimensions
  * Acquisition of additional characteristic data in user-defined properties
  * Export of calculated values
  * Indication "thread full depth" possible for threads


===== Version 3.2.3.0 =====
  * Drawing is marked as edited even if no change was necessary

===== Version 3.2.2.0 =====
  * Export of chamfer either as pattern (e.g. 1,00×45,00°) or separate values

===== Version 3.2.1.0 =====
  * Error: Reading a hole/thread note sometimes leads to an error
  * Support of dwg files during upgrade
  * Extended text support
    
===== Version 3.2.0.0 =====
  * Administration of the single-user licenses via our central license service

===== Version 3.1.4.0 =====
  * Error when exporting with own common tolerances
  * Option to hide upgrade warning for read-only files

===== Version 3.1.3.0 =====
  * Error copying symbols
  * Error when reading ISO tolerances
  * Error when marking a second layer
    
===== Version 3.1.2.0 =====
  * Supports Inventor 2020
  * Chamfer (Automatic) set correct unit for distance value

===== Version 3.1.1.0 =====
  * Automatic updating of project parameters based on file properties
  
===== Version 3.1.0.0 =====
  * Markings of stacked geometric tolerances
  * New filter for automatic stamp process: Marking of dimensions with tolerance only
  * Improvement in numbering: chamfer notes + ordinate dimensions
  * New characteristic type: Simple hole
  * Export of the selected general tolerance name
  * Improved data acquisition for holes/threads (pattern recognition)
  * MIN / MAX tolerances are supported
  
===== Version 3.0.6.0 =====
  * Error: Change to existing number
  * Error: Detection of old file format

===== Version 3.0.5.0 =====
  * Error: Decimal separator 
  * Error: Some dialog aren't displayed completely if display is scaled
  * Error: "Delete all" doesn't delete all markers

===== Version 3.0.4.0 =====
  * Error: Extension of export file name

===== Version 3.0.3.0 =====
  * Export of Testplan.Author data

===== Version 3.0.1.0 (beta) / 3.0.2.0 =====
  * Conversion to extended feature dialogs
  * Changeover to Testplan.Author project data
  * BUG: Refresh & Re-Number: New number was not saved
  * Support of Inventor 2019
  * Copy labels to another inspection plan
  * Project parameters
  * Optimization of license mechanism (Computer ID)
  * Shared settings are now password protected
    
===== Version 2.5.0.0 =====
  * Error: License activation in trial dialog is not saved
===== Version 2.4.0.0 =====
  * Changing license mechanism to machine id
  * BUG: Using the Inventor Undo function can lead to double values
  * Optimized positioning of symbols for ordinate dimensions
  * BUG: Ordinate dimensions where exported as diameters
  * Support Inventor 2018

===== Version 2.3.7.0 =====
  * BUG: Calculation of common tolerances for angular values causes an exception
  * BUG: Create Stamp was possible for stamp symbols
  * BUG: Create Stamp for selection set the insert dialog was displayed
  * BUG: Refresh Stamp for selection set – selection was lost

===== Version 2.3.6.0 =====
  * Insert number 
  * BUG: order of ordinate dimension sets
  * Extended maintenance tools

===== Version 2.3.5.0 =====
  * Pattern recognition for chamfers and thread hole notes

===== Version 2.3.4.0 =====
  * Free Stamp supports Angle values
===== Version 2.3.3.0 =====
  * Support Inventor 2017

===== Version 2.3.2.0 =====
  * Bug: Common tolerances for angular values where calculated wrong

===== Version 2.3.1.0 =====
  * Move application settings to common settings path

===== Version 2.3.0.0 =====
  * Unordered List ItemCreate multiple testplans within one drawing
  * Unordered List ItemExport ISO tolerance value
  * Unordered List ItemBUG: wrong precision value used for calculating tolerance

===== Version 2.2.4.0 =====
  * Choose between unit precision and tolerance precision for common tolerances

===== Version 2.2.3.0 =====
  * Change color of stamp
  * Bug: Options are not saved.

===== Version 2.2.2.0 =====
  * Create CustomTolerances at Export
  * Refresh selected stamps
  * Change angle of arbitrary stamps

===== Version 2.2.1.0 =====
  * Multi Value property for dimensions

===== Version 2.2.0.0 =====
  * Create PDF during export

===== Version 2.1.9.0 =====
  * Multi-Language Support Testplan Wizard
 
===== Version 2.1.8.0 =====
  * New licensing mechanism
  * Discontinued support for Inventor 2011/2012

===== Version 2.1.7.0 =====
  * Export Hole/Thread notes
  * Bug: Add unit to common tolerance set
  * Support Inventor 2016

===== Version 2.1.6.0 =====
  * Export stamp position and sheet number

===== Version 2.1.5.0 =====
  * Add common tolerance for marked dimensions without specified tolerance.

===== Version 2.1.4.0 =====
  * AutoNumbering for “AddStampIcon” command
  * Option that stamp commands will include all sheets
  * Option to create stamps without arrow