Differences

This shows you the differences between two versions of the page.

--- testplaninv:changelog [2018/11/23 14:12]
admin [Version 3.0.4.0]
+++ testplaninv:changelog [2025/02/19 09:16] (current)
admin
@@ Line 1: / Line 1: @@
 ====== Change Log ======
-===== Version 3.0.4.0 =====
+===== Version 3.7.0.3 =====
+  * Inventor 2022 - 2025
+  * NET8 Version for Inventor 2025
+(..)
+===== Version 3.3.7.0 =====
+  * Error: Refresh text
+===== Version 3.3.6.0 =====
+  * Inventor 2022
+  * New calculation functions: CountDoubles, Replace
+  * License settings are saved separately
+  * Common settings are now saved only when settings are unlocked.
+===== Version 3.3.5.0 =====
+  * Error with geometric tolerances without leader line
+  * Error options "Table" wrong value name
+===== Version 3.3.4.0 =====
+  * Error when marking coordinate dimensions
+===== Version 3.3.3.0 =====
+  * New property "Text"
+  * Error when deleting when several documents are open
+  * Setting value "Update project parameters" is now saved in the central settings
+===== Version 3.3.2.0 =====
+  * COM export interface to automate the export process
+  * Filter for holes and threads
+  * Optimization of the positioning of the stamp symbol for geometric tolerances and surface symbols
+  * Error in export of general tolerances based on accuracy SUP-#289
+  * Options: Update of file properties when opening the options dialog DEVOPS-#273
+===== Version 3.3.1.0 =====
+  * Rounding problem with minor deviations at 10th decimal place e.g. 91.499999999999
+  * Updating the characteristic data when updating (& re-number) the stamps
+  * Improvement when processing overwritten chamfer designations
+  * Support of Inventor 2021
+===== Version 3.3.0.0 =====
+  * Export DFD file format
+  * Calculation of general tolerances for holevalues
+  * A file property can now be used to specify that numbering can no longer be changed
+  * Error: If no thread data is available (e.g. for a hole) no empty row is exported anymore
+  * Individual marking of dimension groups e.g. chain dimensions, coordinate dimensions
+  * Exclusion/inclusion of the origin for coordinate dimensions
+  * Acquisition of additional characteristic data in user-defined properties
+  * Export of calculated values
+  * Indication "thread full depth" possible for threads
+===== Version 3.2.3.0 =====
+  * Drawing is marked as edited even if no change was necessary
+===== Version 3.2.2.0 =====
+  * Export of chamfer either as pattern (e.g. 1,00×45,00°) or separate values
+===== Version 3.2.1.0 =====
+  * Error: Reading a hole/thread note sometimes leads to an error
+  * Support of dwg files during upgrade
+  * Extended text support
+===== Version 3.2.0.0 =====
+  * Administration of the single-user licenses via our central license service
+===== Version 3.1.4.0 =====
+  * Error when exporting with own common tolerances
+  * Option to hide upgrade warning for read-only files
+===== Version 3.1.3.0 =====
+  * Error copying symbols
+  * Error when reading ISO tolerances
+  * Error when marking a second layer
+===== Version 3.1.2.0 =====
+  * Supports Inventor 2020
+  * Chamfer (Automatic) set correct unit for distance value
+===== Version 3.1.1.0 =====
+  * Automatic updating of project parameters based on file properties
+===== Version 3.1.0.0 =====
+  * Markings of stacked geometric tolerances
+  * New filter for automatic stamp process: Marking of dimensions with tolerance only
+  * Improvement in numbering: chamfer notes + ordinate dimensions
+  * New characteristic type: Simple hole
+  * Export of the selected general tolerance name
+  * Improved data acquisition for holes/threads (pattern recognition)
+  * MIN / MAX tolerances are supported
+===== Version 3.0.6.0 =====
+  * Error: Change to existing number
+  * Error: Detection of old file format
+===== Version 3.0.5.0 =====
   * Error: Decimal separator
   * Error: Some dialog aren't displayed completely if display is scaled

REITEC Help

User Tools

Site Tools

Differences

Page Tools